SEA-SPEED

SEA-SPEED® V 10 X ULTRA CLEAR is the latest version in the SEA-SPEED lineage.  A completely new chemistry based on seven years of development and testing.   Truly the Ultimate hull coating solution for the future and beyond.  Taking Sustainability to a new level in efficient, low drag fuel savings and GHG reduction capabilities across all ship types.  SEA-SPEED can enable meeting and exceeding EEXI and CII for all your ships.

is a true GREEN alternative to standard TOXIC self-polishing or ablative antifouling paints, Soft Silicone paints and Epoxy hardcoats.

• Ultra-low AHR (surface roughness) of less than 5 microns. Conventional AF ranges from 120 – 175 microns.  Each 20 Microns = 1% difference in fuel consumption.  Fuel consumption reduction directly affects CO2 (GHG) emissions.
• A ten (10) year warranted coating cuts maintenance OPEX and associated re-painting & docking costs.
• Exceptionally Durable – does not ablate polish or leach. Very abrasion and impact resistant
• 100 % Non-toxic: No metals – No cuprous oxide or zinc – No chemical Biocides, algaecides.  May be cleaned in water without environmental restrictions or negative impact.  The extremely hard surface helps mitigate fouling and facilitates quick & easy cleaning with normal commercially available equipment globally.

SEA-SPEED V 10 X CLEAR TDS

SEA-SPEED V10 – CLR (PART A) Activator MSDS

SEA-SPEED V10 – CLR (PART B) Base resin MSDS

Armor-Sil® R/G is the most effective and longest-lasting Running gear protection technology available globally. Increasing and maintaining peak propeller performance and durability for years is key for all types of large commercial vessels as well as pleasure craft. Armor-Sil® R/G is another first for Seacoat SCT, LLC. Armor-Sil® R/G is a silane–siloxane nano-coating that cures to an extremely hard glass-smooth finish. It is a non-stick surface. It should be applied over our PPV 702 etch primer.

Armor-Sil RG TDS

Armor-Sil RG PART A MSDS

Armor-Sil RG PART B MSDS

PPV 702 Etch Primer TDS

PPV 702 PART A MSDS

PPV 702 PART B MSDS

Seapoxy 73 is our Polyamide epoxy (A/C anticorrosive) barrier coat. It is our standard anticorrosive primer for the SEA-SPEED V 10 X ULTRA CLEAR. It is a Mil-Spec immersion grade product.

SEAPOXY 73 TDS

SEAPOXY 73 PART (A) ACTIVATOR MSDS

SEAPOXY 73 PART (B) – BASE RESIN MSDS