Commercial Marine SEA-SPEED V5 hard film (siloxane), silicone foul release paint along with our specified Seapoxy 85 marine epoxy primer is designed for application to steel or aluminum hulls on all types of commercial vessels, including Container ships, bulkers, Ro-Ro vessels, Oil tankers and product tankers as well as ferries. Seacoat’s SEA-SPEED is an ideal alternative to soft duplex silicone foul release coatings or Traditional TOXIC ablative antifouling or SPC antifouling paint. Boat bottom paints of the future will need to environmentally compliant and contribute to increased hull efficiency.

SeaCoat’s marine coating technology is highly durable (resistant to abrasion and impact). The coating is designed to have a very low coefficient of friction, as well as low surface energy resulting in reduced drag and improved fuel economy. The SEA-SPEED V5 also is extremely smooth, with a surface roughness of under ten (10) microns. See testing certification section for more details. Depending on the vessel design, increases in speed and fuel economy may be realized.
The polysiloxane Fluoropolymer (Silicone) technology yields a medium gloss slick surface that is non-conducive to adhesion of marine growth. Unlike conventional bottom paint, SEA-SPEED V5 can be scrubbed without damaging the coating or releasing toxic cuprous oxides or biocides into the aquatic environment. Whereas conventional bottom painting products may last several years, SEA-SPEED is a non-depleting material that does not polish or ablate.

Contact UsSeaCoat Technology, LLC
11215 Jones Road West, Suite H
Houston, Texas 77065
Phone: (832) 237 4400
Fax: (832) 237 4414

Learn MoreAbout SeaCoat